Humidity prevents Static charge and Screen drying
Keeping the relative humidity around 55-60%RH will drastically reduce problems caused by electrostatic charge.
Advantages
Reduction of electro static and misprinting
Misprints such as uneven color, smudged lines and chipped letters dut to electro static are reduced by 50%.
Preventing screen drying
Preventing dot off pinting due to screen clogging because of drying.
Higher productivity
When printing on plastic products it prevents electro static discharge when workers touch the product. This improved the work environment and led to higher productivity.
Features of AKIMist”E”
1. Fine and uniform mist droplets
| AKIMist”E” |
Conventional pneumatic |
Spinning disk type |
Ultrasonic type |
|||
 |
 |
 |
 |
Dry Fog is an extremely fine uniform mist with a Sauter mean droplet size of 7.5μm.
The droplets are never larger (i.e. 40μm) which makes dry humidification possible.
Another advantage of the AKIMist "E" is that it can spray Dry Fog at a maximum rate of up to 3.8 GPH.
2. Minimized Energy Consumption
Because of Dry Fog the AKIMist "E" can humidify precisely and effeciently directly where it is needed.
Features of AKIMist”E”
1. Fine and uniform mist droplets
| AKIMist”E” |
Conventional pneumatic |
|
|
|
|
| Spinning disk type |
Ultrasonic type |
|
|
|
Dry Fog is an extremely fine uniform mist with a Sauter mean droplet size of 7.5μm.
The droplets are never larger (i.e. 40μm) which makes dry humidification possible.
Another advantage of the AKIMist "E" is that it can spray Dry Fog at a maximum rate of up to 3.8 GPH.
2. Minimized Energy Consumption
Because of Dry Fog the AKIMist "E" can humidify precisely and effeciently directly where it is needed.
Example of a Set-up Sheet offset machine
Sheet offset machine
Examples
Why doesn't dry fog get wet?
Small bubbles/water droplets do not wet anything because they bounce back from the surface they touch. As it surface tension is high, compare to a bigger bubble/water droplet, it will not burst and wet the environment.
Dry Fog is a very fine fog with an average mean droplet diameter of 10 μm or less. Therefore, the fog sprayed from our AKIJet® nozzles will never burst and wet objects when spraying in a close room, above machine and operators.
