SIAM IKEUCHI CO., LTD.

share

Compact Design Low Flow Rate Fine Fog Nozzles/ Flat Spray CBIMV-S series nozzles

Thread standard - Pipe conn. size See catalog Standard pressure -
Spray angle 80° (*1) Spray capacity 0.1–5.5 L/hr Supply air type Compressed air
Liquid feeding system Liquid siphon Mean droplet diameter 20–30 μm Air consumption 3.75–92 L/min, Normal
Air pressure 0.2–0.4 MPa Free passage diameter 0.2–0.7 mm (*2)

Features

• Compact version of BIM series producing fine atomization. Space-saving design.
• Able to provide the lowest spray flow rate among all of our pneumatic spray nozzles.
• Clog-resistant design with a low parts count.
• Some CBIMV-S models are available with a spray control adaptor, which can regulate spray ON/OFF with a built-in piston.
(See the PERFORMANCE DATA in the catalog below about the availability of adaptor for each model number.)
• CBIMV-S series are flat spray pneumatic nozzles producing fine atomization with a mean droplet diameter of 30 μm or less (*3).
• Liquid siphon feed type (liquid pressure device is not required).
• Even spray distribution across the entire spray area.
• Spray angle of 80゚.

*1) Spray angle measured at a compressed air pressure of 0.3 MPa and liquid siphon height of 100 mm.
*2) Free passage diameter of the nozzle orifice.
*3) Measured by Laser Doppler Method.

Applications

Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Cleaning: Printed circuit boards, glass tubes, etc.
Others: Dust suppression, catalyst denitration, etc.

Industries in which this nozzle is used

• Steelmaking
• Pollution control
• Electronics
• Paper & pulp
• Printing
• Food
• Automotives

Product specifications

Structure • Comprising four parts: Nozzle tip, core, cap, and adaptor.
• Internal mixing type designed to mix compressed air and liquid inside the nozzle (Inner air type: compressed air flows in the center of the nozzle, while liquid flows along its circumference).
• Liquid siphon feed type.
Material Stainless steel 303
Mass

About 22 g

Outer dimensions

①Tip
②Core
③Cap
④Adaptor

Dimensions and Pipe connection sizes

Air consumption code Outer dimensions (mm) Pipe conn. size
L1 L2 L3 L4 H Compressed air Liquid Fixing
005 27.7 19.2 8 2.5 13 M5 depth 3 M5 depth 3 M3×2
01 27.7 19.2
02 28 19.5
04 31.3 22.8
075 32.6 24.1

• Appearance and dimensions may differ depending on nozzle codes and materials. Please contact us for details.

วิธีการสั่งสินค้า

หากมีคำถาม? เราสามารถจัดทำผลิตภัณฑ์สั่งทำพิเศษเพื่อให้ตรงกับความต้องการของคุณ

โปรดสอบถามหรือสั่งซื้อหัวฉีดสเปรย์โดยใช้รหัสจากแคตตาล็อค
ระบบการเข้าถึงรหัสได้อธิบายไว้ในแคตตาล็อก สามารถที่จะดาวน์โหลดได้โดยคลิกปุ่ม "แคตตาล็อก" ที่อยู่ด้านล่าง
คุณยังสามารถติดต่อเราเพื่อขอข้อมูลเพิ่มเติมเพื่อหาผลิตภัณฑ์ที่เหมาะสม